Bond It Bitumen Paint
General purpose Bituminous Black Paint
Bond It BITUMEN PAINT is used to rejuvenate tarmacadam driveways and for the protection of ferrous and non-ferrous metals, concrete, roofing felt, fibre/cement, corrugated iron, asphalt and wood, against water.
Preparation
Surfaces must be clean, dry and free from grease, oil and any loose material.
Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer.
Surfaces to be treated must be completely free of water before applying BITUMEN PAINT.
Application
BITUMEN PAINT is supplied ready for use and should not require thinning. Apply at least two coats by brush, roller or spray allowing each coat to dry before applying the next coat.
Note: At very low service temperatures the coating will become less flexible, while at high temperatures it becomes soft and less resistant to degradation by the environment, and will ultimately flow.
Drying Time,
Approximately 6 hours depending on drying conditions.
Technical Info
Download Bond It Bitumen Paint flyer
For further information on our Bond It Bitumen Pain product, please do not hesitate to contact a member of our Technical Team.
